Choose the correct process of 'Bronze Casting'.
A. Coating of figure with clay and allowed to dry
B. Filled with molten metal
C. Took the original shape
D. Carving of wax
E. Wax is heated and drained out
Choose the correct answer from the options given below:
Answer & explanation
Correct answer: option 3
The correct answer is Option (3) → D, A, E, B, C
Bronze figures are cast by the lost wax method. The model is first shaped in wax and then lost, melted out, to leave a hollow mould for the metal. In Dhokra casting the model is shaped in resin, which works the same way.
D. Carving of wax — the figure is first modelled in wax, with all its details.
A. Coating of figure with clay and allowed to dry — the wax figure is covered with layers of clay, which are left to dry.
E. Wax is heated and drained out — on heating, the wax melts and runs out, leaving a hollow space inside the clay.
B. Filled with molten metal — molten bronze is poured into this hollow mould.
C. Took the original shape — the metal fills the space once taken by the wax, so it takes the shape of the original figure. The clay is then broken away.
NCERT (2026-27): “Dhokra casting …Among the popular sculptural traditions, Dhokra or metal sculptures made from lost wax or cire perdue technique is one of the most prominent metal crafts of Bastar, Chhattisgarh, parts of Madhya Pradesh, Odisha and Midnapore in West Bengal. It involves casting of bronze through the lost wax method.…” “…The dried clay form is, then, overlaid with these resin strips or coils and all decorative details and eyes, nose, etc., are added to the figures. The clay form is, then, covered with layers — first of fine clay, then, with a mixture of clay and cow dung, and finally, with clay obtained from ant hills mixed with rice husk.…” “…The moulds are, then, taken out with a pair of tongs, turned upside down, given a brisk shake and the metal is poured through the receptacle. The molten metal flows exactly into the space once occupied by resin, which would by now have evaporated.…” |